Config Server Firewall(CSF)commands.
CSF is the firewall framework that is most widely used to protect Linux servers.
CSF has a wide variety of options for controlling the Linux firewall from the control panel and from the command line. The CSF installation includes cPanel, DirectAdmin and Webmin preconfigured settings and control panel UIs.
Usage and installation of CSF is quite simple.
Working principle of CSF
As with most iptables firewall setups, the concept with CSF is to block all and then let only those connections you want through. This is achieved by DROPPING all ties on all protocols in and out of the server in iptables. Then allow traffic from existing links in and out. Then open the ports separately for both TCP and UDP in and out.
The installation steps for CSF on the Linux server have already been addressed. Click here to install CSF on CentOS and customize it.
After you have successfully enabled CSF, you need to disable TESTING mode to function properly with CSF on your server.
[[email protected] #] vim /etc/csf/csf.conf Then change the value of 'TESTING' from 1 to 0
CSF commands for managing server firewall.
STEP 1. Enable CSF and LFD if formerly disabled
csf -e Or csf --enable
STEP 2. Disable CSF and LDF Effectively
csf -x Or csf --disable
START 3. Restart firewall rules
csf -r Or csf --restart
STEP 4. Start the firewall rules
csf -s Or csf --start
STEP 5. Flush/Stop firewall rules (Note: lfd may restart csf)
csf -f Or csf --stop
STEP 6. List/Show the IPv4 iptables configuration
csf -l Or csf --status
STEP 7. List/Show the IPv6 ip6tables configuration
csf -l6 Or csf --status6
You must have some ideas about the following configuration files for using some other csf commands.
csf.conf : Configuration file for controlling CSF. csf.allow : Allowed IP’s and CIDR addresses list on the firewall. csf.deny : Denied IP’s and CIDR addresses list on the firewall. csf.ignore : Ignored IP’s and CIDR addresses list on the firewall. csf.*ignore : The list of various ignore files of users, IP’s.
STEP 8. Allow an IP and add to /etc/csf/csf.allow
csf -a ip [comment] Or csf --add ip [comment]
You can add your comments in the square bracket. See the example below:
[[email protected] ~]# csf -a 6x.8xx.1x2.8x [My server] Adding 6x.8xx.1x2.8x to csf.allow and iptables ACCEPT... ACCEPT all opt -- in !lo out * 6x.8xx.1x2.8x -> 0.0.0.0/0 ACCEPT all opt -- in * out !lo 0.0.0.0/0 -> 6x.8xx.1x2.8x
6x.8xx.1×2.8x – is the IP address and ‘My server’ inside the square bracket is the comment. You can check the /etc/csf/csf.allow file for more details:
[[email protected] ~]# grep 6x.8xx.1x2.8x /etc/csf/csf.allow ------ 6x.8xx.1x2.8x # [My server] - Thu Dec 19 23:16:27 2013 ------
STEP 9. Remove an IP from /etc/csf/csf.allow and delete rule
csf -ar Or csf --addrm ip
STEP 10. Deny an IP and add to /etc/csf/csf.deny
csf -d Or csf --deny ip [comment]
STEP 11. Unblock an IP and remove from /etc/csf/csf.deny
csf -dr Or csf --denyrm ip
STEP 12. Remove and unblock all entries in /etc/csf/csf.deny
csf -df Or csf --denyf
STEP 13. Search the iptables and ip6tables rules for a match (e.g. IP, CIDR, Port Number)
csf -g Or csf --grep ip
[[email protected] ~]# csf -g 6x.8xx.1x2.8x Chain num pkts bytes target prot opt in out source destination ALLOWIN 1 0 0 ACCEPT all -- !lo * 6x.8xx.1x2.8x 0.0.0.0/0 ALLOWOUT 1 0 0 ACCEPT all -- * !lo 0.0.0.0/0 6x.8xx.1x2.8x
Temporary allow or deny of IP:
The following csf commands are using to allow or deny an IP address temporary from our server.
STEP 14. Displays the current list of temporary allow and deny IP entries with their TTL and comment
csf -t Or csf --temp
STEP 15. Add an IP to the temp IP allow list (default:inout)
csf -ta ip ttl [-p port] [-d direction] [comment] Or csf --tempallow ip ttl [-p port] [-d direction] [comment]
Where ttl is the time to live in seconds(Default value: 3600)
[[email protected] ~]# csf -ta 66.8x.1xx.xx ACCEPT all opt -- in !lo out * 66.8x.1xx.xx -> 0.0.0.0/0 ACCEPT all opt -- in * out !lo 0.0.0.0/0 -> 66.8x.1xx.xx csf: 66.8x.1xx.xx allowed on port * for 3600 seconds in and outbound
STEP 16. Add an IP to the temp IP ban list.
csf -td ip ttl [-p port] [-d direction] [comment] Or csf --tempdeny ip ttl [-p port] [-d direction] [comment]
[[email protected] ~]# csf -td 66.8x.1xx.xx DROP all opt -- in !lo out * 66.8x.1xx.xx -> 0.0.0.0/0 csf: 66.8x.1xx.xx blocked on port * for 3600 seconds inbound
STEP 17. Remove an IP from the temporary IP ban or allow list
csf -tr Or csf --temprm ip
STEP 18. Flush all IPs from the temporary IP entries
csf -tf Or csf --tempf
STEP 19. General commands:
csf -v Or csf --version : Show csf version csf -c Or csf --check : Check for updates to csf but do not upgrade csf -u Or csf --update : Check for updates to csf and upgrade if available csf -h Or csf --help : For help